How much does it cost to build a football stadium?
By MakeHelm Ltd · Updated
Recent Premier League stadiums have cost between about £16,000 and £18,500 per seat to build, while smaller grounds and older projects came in at roughly £2,000 to £5,000. The difference comes down to scale, hospitality, roofs, the site and the year the bill was paid.
Tottenham's audited build cost works out at £18,405 a seat. Brighton's Falmer stadium was budgeted at £2,267 a seat when it won planning approval in 2005. This guide sets out the published numbers, what pushes them up, and how Stadium Designer's own (much simpler) cost model splits the bill for two of its preset grounds.
Real stadium costs per seat
Cost per seat is the build cost divided by capacity. It is the easiest way to compare grounds of different sizes, though it hides a lot. Here are the published figures for English grounds, newest first.
Each of these numbers needs a footnote. Tottenham's £1,156,740,741 is the audited cost at June 2022 and it leaves out the land, which sits in other group companies. The widely quoted £1.5bn is a 2025 valuation, which would be £23,916 a seat if you divided it the same way, but it is not what the club spent. Everton's £851m is what had been capitalised by June 2025 while the stadium was still being finished, so the final figure will be higher. The Old Trafford number is a plan, not a bill.
At the other end, AFC Wimbledon's Plough Lane cost £31.7m for about 9,200 spectators, and a housing developer's Section 106 payments of £14m covered 44% of it. Brighton's £50.7m for 22,374 seats was the figure at planning approval in 2005, and construction prices have risen a long way since.
The property consultant Savills puts typical stadium development costs at £3,500 to £5,000 per seat, "but can be much more". It also points out how little a finished stadium is worth on paper: it cites Wasps' Coventry arena changing hands at about £500 a seat. Clubs build because a new ground earns more on matchdays and lifts the value of the club, not because the building itself holds its value.
What drives the cost of a stadium
Building magazine's cost model for a 25,000-seat stadium lists the usual suspects. Most of them are choices the designer makes.
Hospitality and seat type
A plain tip-up seat on a concrete terrace is the cheap part. Executive boxes, club seats and lounges need kitchens, lifts, separate entrances and a fit-out good enough to rent out on non-matchdays. The newest Premier League grounds are built around large hospitality areas, and that floor space is a large share of their bills.
Tiers and height
A single tier close to the ground is simple to build. Each extra tier adds structure, raking beams, stair cores, lifts and fire escape routes, and the stand gets taller and heavier. Upper tiers also have to be steeper to keep the view clear (see how steep stadium stands can be), which adds more structure again.
Roofs
Roof cost depends on span, area, the cantilever needed to keep columns out of the view, and the wind loads it has to resist. A roof that covers a whole bowl, or one that opens and closes, costs far more per square metre than a simple cantilever over one stand.
Corners and bowls
Filling the corners turns four stands into a bowl and adds seats without new land, but curved geometry is harder to build. Building's model gives bowl designs a cost premium of up to 5% over straight stands.
The site
Land is often left out of the headline figure, as it is at Tottenham. Sinking the pitch below street level can keep the stands lower, but digging out the bowl gets expensive if the ground is wet or contaminated.
When the money was spent
A cost per seat from 2005 and one from 2022 are not the same unit. Always check the year before comparing.
Where the money goes in Stadium Designer
Stadium Designer is a design game, so its costs are simplified, but every cost in the editor comes from a short list of unit costs:
- £22.0m for the pitch, groundworks and services, whatever you build
- £3,800 per standard seat, £6,500 per premium seat and £2,600 per safe-standing place
- corner seats cost 15% more than the same seat in a straight stand
- £450,000 per executive box
- roofs by area: £1,800/m² cantilever, £2,900/m² halo, £4,300/m² retractable
- £60,000 per kiosk, £9,000 per toilet, £120,000 per exit gate
Here is how that splits for two presets: Harbour Park, a 25,087-seat ground with a two-tier main stand, and The Meridian, a 42,822-seat bowl.
The stands are the biggest line in both: 54% of Harbour Park's bill and 48% of The Meridian's. The bowl is dearer per seat for the same reasons real ones are: its filled corners and 100 boxes together come to £82.0m, 27% of the total. The fixed £22.0m for the pitch matters less as the ground grows, which is why the tiny Ottermill Rec preset costs £9,328 a seat.
The game's per-seat totals land above Savills' typical range and far below the new Premier League grounds. They leave out land, fees, finance and most of the fit-out, so read them as a way to compare designs, not as a budget.
In Stadium Designer
In the editor the budget readout updates on every change, and each stand's panel shows what that stand costs. Some ways to bring the cost per seat down:
- Add rows to existing stands before adding tiers or corners. Every seat spreads the fixed £22.0m a little thinner.
- Make an end safe standing: £2,600 a place against £3,800 for a standard seat, and the crowd gets louder. More in the safe standing guide.
- Use a cantilever roof unless you need a concert venue. A retractable roof costs 2.4 times as much per square metre.
- Keep boxes for the main stand. Each one is £450,000 before anyone has bought a ticket.
The Shoestring challenge turns this into a puzzle: 12,000+ seats, no errors and £/seat ≤ £5,000, with a budget of £60.0m.
Open Elmfield Road in the editor, or take the Shoestring challenge: Most seats per pound. Leaderboard coming soon.
Frequently asked questions
How much does it cost to build a football stadium per seat?
Recent Premier League stadiums have cost roughly £16,000 to £18,500 per seat: Tottenham's audited build cost works out at £18,405 a seat and Everton's at least £16,131. Smaller grounds cost far less. AFC Wimbledon's Plough Lane came to about £3,450 a seat, and Savills puts typical stadium development costs at £3,500 to £5,000 per seat, while noting they can be much more.
Did the Tottenham Hotspur Stadium cost £1.5 billion?
No. The audited build cost was £1,156,740,741 at June 2022, about £18,405 for each of its 62,850 seats, and that excludes the land. The £1.5bn figure is a 2025 valuation of the stadium, which is a different thing from what it cost to build.
Why are new Premier League stadiums so expensive per seat?
They carry far more than seats: large hospitality areas fitted out for year-round use, big roofs that span a whole bowl, multiple tiers with the stairs, lifts and fire routes they need, and tight urban sites. A small ground with one roofed stand and a few rows of seats spends most of its money on the basics.
Why does a small stadium cost more per seat than a big one?
Some costs barely change with capacity: the pitch, drainage, floodlights, groundworks and services. Spread over a few thousand seats they push the cost per seat up. In Stadium Designer the pitch and groundworks cost £22.0m whatever you build, so the 4,044-capacity Ottermill Rec works out at £9,328 a seat while The Meridian, with 42,822 seats, comes in at £7,214.
Does Stadium Designer use real construction costs?
It uses a simplified game model with round unit costs: £3,800 per standard seat, £6,500 per premium seat, £2,600 per safe-standing place, £450,000 per executive box, plus roofs priced by area and fixed costs for kiosks, toilets and gates. Use the totals to compare your own designs with each other, not as a quote for a real build.
Sources
- Tottenham's stadium cost £1.157bn, not £1.5bn (Stadiumetrix, October 2026: Tottenham, Everton and Old Trafford figures)
- Plough Lane cost £31,735,847 to build, about £3,450 a seat (Stadiumetrix, November 2026)
- Seagulls stadium wins approval despite beauty spot controversy (Building, November 2005: Falmer cost and capacity)
- The Stadium: the statement build (Savills, Aspects of Leisure: typical cost per seat and resale values)
- Cost model: football stadiums (Building, June 2004: cost drivers for a 25,000-seat stadium)
Rules of thumb for a design game, not engineering or safety advice. Stadium Designer's numbers come from a simplified model; real grounds are designed by qualified engineers to the Guide to Safety at Sports Grounds and local licensing conditions.
More guides
What a stadium C-value is, the formula, what 60, 90 and 120 mm mean for your view of the pitch, and why rows get steeper towards the back.
Why UK seated stands stop at about 35 degrees, why terraces stop at 25, how steep 'wall' stands work, and how upper tiers end up steeper than lower ones.
What rail seating is, how licensed standing returned to Premier League and Championship grounds in 2022, and the capacity and atmosphere trade-offs.
The eight-minute exit rule from the Green Guide, flow rates per metre of exit width, a worked example for a 25,000 ground, and kiosk and toilet ratios.