StadiumDesigner
Guide

College football stadium capacity explained

By MakeHelm Ltd · Updated

The biggest college football stadiums hold just over 100,000 people. Michigan Stadium leads with an official capacity of 107,601, and eight stadiums hold 100,000 or more. They get there with long rows of bench seating, bowls dug into the ground and horseshoes that grew a deck at a time, and most of them are slowly getting smaller.

This guide lists the biggest stadiums and their record crowds, explains how bench seating packs people in, why so many are horseshoes and bowls, and why renovations keep taking seats away. Then it shows how the same ideas work when you build a 100,000-seat bowl in Stadium Designer.

The biggest college football stadiums

These are the official capacities from each school's athletics site, with the biggest crowd each stadium has held. Records can beat capacity because standing room, temporary seats and tightly packed benches let in more people than the seat count.

Penn State's own page says only that Beaver Stadium holds crowds "in excess of 107,000"; its capacity has moved around with temporary bleachers over the years. Ohio State's official page gives 102,041, though many other sources still quote 102,780. Kyle Field briefly held 106,000 in 2014, the year of its record, before settling at 102,733 in 2015.

How bench seating packs people in

Many of the biggest college stadiums still seat most fans on long benches. A bench has no arms, so nothing fixes how much of it each person takes. Building and fire codes count bench seating at one person for every 18 inches of bench: Minnesota's fire code and New York's both use that figure. A row of individual chairbacks takes more width per person, so swapping benches for chairs costs seats along every row.

The schools' own histories show how sensitive capacity is to a few inches. Texas A&M's timeline for Kyle Field records that in 1982 seats on the east side were narrowed and capacity rose to 72,387, and that in 1992 the seats were widened again and capacity fell back to 70,210. LSU added 25,000 chairback seats in 1985 to replace older bench seats, and later renumbered the stadium so that every seat was the same size.

Bench sections also suit the way students watch. A student section stands for most of the game, so a bench is somewhere to stand as much as sit, and packing fans in tightly suits it.

Why horseshoes and bowls

Most of the giants started much smaller and grew. Their shapes show how.

The dug-in bowl

Michigan Stadium opened in 1927 with 72 rows, modelled on the Yale Bowl. Because of a high water table, nearly three-quarters of it was built below ground level, so the bowl was dug out rather than built up. It cost $950,000, and 10,000 temporary seats took its first capacity to 84,401. A bowl in the ground needs no tall stand structure, which is why it could keep adding rows for a century.

The horseshoe

Ohio Stadium, finished in 1922 for $1.3 million, is a double-deck horseshoe: three sides of seating with one end open. It held 66,210 at first. Temporary stands later closed the open south end, and they became permanent in 2001. LSU's Tiger Stadium became a horseshoe in 1936 and closed its south end into a bowl in 1953. Penn State's Beaver Stadium was built as a horseshoe seating 46,284 in 1960, and in 1978 the whole structure was jacked up eight feet so rows could be added underneath.

The pattern is the same each time. An open end is cheap to leave and easy to fill later, a second deck adds capacity without new land, and closing the horseshoe into a bowl is the last step.

Why capacities are shrinking

The record crowds are mostly from the last twenty years, but the official capacities are falling. In 2015 Michigan cut its capacity from 109,901 to 107,601, removing seats to make room for wider aisles and handrails under the Americans with Disabilities Act. Ohio State's 2016 plans removed about 2,600 seats, many of them on the B-deck with poor views. Neyland Stadium's 2022 capacity of 101,915 reflects a net loss of seats after new club and social spaces went in, down from 102,455. The money in a modern stadium is in premium seating, so a renovated college stadium tends to have fewer, wider and more expensive seats.

3D view of Prairie Bowl, a Stadium Designer preset ground
Prairie Bowl, Stadium Designer's 100,190-seat college horseshoe with one open end. In the game's cost model it comes to $940.3m, or $9,385 a seat.

In Stadium Designer

In American football mode in the editor, every side of the field is its own stand, and any side can have no stand at all, so a horseshoe is one switch. Prairie Bowl shows the college recipe: 100,190 places, the biggest stand alone holding 26,010, with up to 110 rows on a side.

Bench places are narrower than seats, so more fit along each row, and they are cheap: $1,100 a place in the game's model against $11,000 for a standard seat and $30,000 for a club seat. That is why Prairie Bowl costs $9,385 a seat while The Anchorage, a pro-style dome full of chairbacks and suites, costs $29,996. At the other end of the scale, the high school ground Millbrook Field seats 6,888 on bleachers for $20.0m.

  • Add rows to the sideline stands first. Long sidelines hold the most seats and the best views.
  • Use benches for the lower bowl and the student end; save chairbacks and suites for the sidelines.
  • Watch the sightline check as the rows climb. A very deep tier has to get steeper towards the back to keep the view clear.
  • Close the open end last, like the real ones did.

The College Town challenge asks for 100,000+ seats, noise ≥ 75, game-day takings ≥ $11m and concessions ≤ 1:275, on a budget of $1.10bn.

Try it

Open Prairie Bowl in the editor, or take the College Town challenge: Saturdays, 100,000 people, one stadium. Make the Prairie Bowl the loudest in the conference.

What a pro stadium costs is in how much does an NFL stadium cost?, and the rest of American football mode is on the American football stadium designer page.

Frequently asked questions

What is the biggest college football stadium?

Michigan Stadium in Ann Arbor, with an official capacity of 107,601. Its record crowd of 115,109, against Notre Dame in 2013, is the largest ever recorded at a college or NFL game. Penn State's Beaver Stadium is close behind, with a record of 111,030 in 2024.

How many college football stadiums hold 100,000 or more?

Eight hold 100,000 or more: Michigan, Penn State, Ohio State, Texas A&M, LSU, Tennessee, Texas and Alabama. All of them are in the Big Ten or the SEC.

How can a college stadium fit more fans than its capacity?

Many of the big stadiums use backless bench seating, where nothing physically separates one fan's place from the next. Building codes count benches at one person per 18 inches, so a packed student section can squeeze in more than the seat numbers suggest. Standing room and temporary seats add more on big days.

Why do college stadiums keep losing seats?

Renovations swap benches for chairbacks, add premium clubs and suites, and widen aisles for access. Michigan cut 2,300 seats in 2015 for disability access, and Tennessee's Neyland Stadium lost capacity in 2022 when new club and social spaces went in.

Can I build a 100,000-seat college stadium in Stadium Designer?

Yes. The Prairie Bowl preset is a 100,190-seat college horseshoe with bench seating and an open end, and it costs $940.3m in the game's dollar cost model. You can add rows and tiers, close the end into a bowl or open it up again.

Sources

  1. Michigan Stadium (University of Michigan Athletics: capacity, record crowd and history)
  2. Michigan Stadium reduces capacity to 107,601 (CBS Detroit, August 2015)
  3. Beaver Stadium (Penn State Athletics: record crowd and horseshoe origins)
  4. Ohio Stadium (Ohio State Athletics: capacity, record and the double-deck horseshoe)
  5. Kyle Field (Texas A&M Athletics: capacity, record and the seat-width timeline)
  6. Tiger Stadium (LSU Athletics: capacity, the horseshoe and the bench seats)
  7. Neyland Stadium (Tennessee Athletics: capacity and the 2022 reduction)
  8. Texas falls to Georgia, 30-15 (Texas Athletics, October 2024: record crowd at DKR)
  9. Bryant-Denny Stadium (Alabama Athletics: capacity history)
  10. Ohio Stadium renovations planned for 2017-20 (Ohio State News, March 2016)
  11. Occupancy: benches, one person to each 18 inches (New York Codes, Rules and Regulations, 12 NYCRR 36-2.2)
  12. Occupant loads in assembly buildings (Minnesota State Fire Marshal: one person per 18 inches of bench)

Rules of thumb for a design game, not engineering or safety advice. Stadium Designer's numbers come from a simplified model; real stadiums are designed by qualified engineers to local building and fire codes.